Tragbare Pulver-Feuerlöscher

Tragbarer, dauerhaft unter Druck stehender ABC-Pulverfeuerlöscher mit 1 kg Löschmittel. Geeignet für Brände der Klassen A, B und C; für elektrische Anlagen unter Spannung verwendbar. Hergestellt nach EN 3-7 und Richtlinie 2014/68/EU (Druckgeräterichtlinie). Wartung gemäß den am Installationsort geltenden Vorschriften und UNI 9994-1.

Tragbarer, dauerhaft unter Druck stehender ABC-Pulverfeuerlöscher mit 2 kg Löschmittel. Geeignet für Brände der Klassen A, B und C; für elektrische Anlagen unter Spannung verwendbar. Hergestellt nach EN 3-7 und Richtlinie 2014/68/EU (Druckgeräterichtlinie). Wartung gemäß den am Installationsort geltenden Vorschriften und UNI 9994-1.

Tragbarer, dauerhaft unter Druck stehender ABC-Pulverfeuerlöscher mit 4 kg Löschmittel. Geeignet für Brände der Klassen A, B und C; für elektrische Anlagen unter Spannung verwendbar. Hergestellt nach EN 3-7 und Richtlinie 2014/68/EU (Druckgeräterichtlinie). Wartung gemäß den am Installationsort geltenden Vorschriften und UNI 9994-1.

A portable fire extinguisher is essential equipment in any place where there is a fire risk. The permanently pressurised model is ready to use and does not require auxiliary propellants to operate. Drawing on more than 50 years of experience in fire protection, this extinguisher is manufactured using state-of-the-art systems that meet the strict construction criteria laid down by European standards. Each extinguisher is pressurised with a mixture of 97% nitrogen and 3% helium: nitrogen prevents condensation from forming inside the cylinder, preserving its integrity and preventing clumping of the extinguishing agent; helium is used as a tracer to check for leaks using mass spectrometry. Every unit produced is checked for leaks.

All extinguishers are made from raw materials supplied by recognised leading suppliers. All purchased products undergo strict quality checks to ensure high performance and excellent quality.

The extinguisher is manufactured in accordance with EN3-7 and Directive 2014/68/EU (PED), and is approved for sale on the Italian market in accordance with the Ministerial Decree of 7 January 2005.

Extinguishing Agent

ABC monoammonium phosphate (MAP) powder. This multipurpose powder is suitable for extinguishing Class A fires involving solid combustible materials such as wood, paper and textiles; Class B fires involving flammable liquids, oils, fats and paints; and Class C fires involving flammable gases. The effectiveness of the extinguishing agent is proportional to its MAP content. The powder extinguishes mainly by inhibiting unburnt material through negative catalysis, while generally reducing temperatures, and by smothering the flame through the release of inert gases that deprive the fire of oxygen (fuel).

Applications

This extinguisher is designed for use in residential and industrial settings. It can be used on live electrical equipment.

Maintenance

To keep the extinguisher in perfect working order, follow the regulations in force in the country of installation. If no specific regulations apply, maintenance must be carried out as specified in Standard UNI 9994-1:2013. For installations in Italy, refer to the Ministerial Decree of 7 January 2005, specifically Standard UNI 9994-1:2013, and to the instruction booklet supplied with the extinguisher. Use only original spare parts: using non-original parts voids the extinguisher’s approvals.

A portable fire extinguisher is essential equipment in any place where there is a fire risk. The permanently pressurised model is ready to use and does not require auxiliary propellants to operate. Drawing on more than 50 years of experience in fire protection, this extinguisher is manufactured using state-of-the-art systems that meet the strict construction criteria laid down by European standards. Each extinguisher is pressurised with a mixture of 97% nitrogen and 3% helium: nitrogen prevents condensation from forming inside the cylinder, preserving its integrity and preventing clumping of the extinguishing agent; helium is used as a tracer to check for leaks using mass spectrometry. Every unit produced is checked for leaks.

All extinguishers are made from raw materials supplied by recognised leading suppliers. All purchased products undergo strict quality checks to ensure high performance and excellent quality.

The extinguisher is manufactured in accordance with EN3-7 and Directive 2014/68/EU (PED), and is approved for sale on the Italian market in accordance with the Ministerial Decree of 7 January 2005.

Extinguishing Agent

ABC monoammonium phosphate (MAP) powder. This multipurpose powder is suitable for extinguishing Class A fires involving solid combustible materials such as wood, paper and textiles; Class B fires involving flammable liquids, oils, fats and paints; and Class C fires involving flammable gases. The effectiveness of the extinguishing agent is proportional to its MAP content. The powder extinguishes mainly by inhibiting unburnt material through negative catalysis, while generally reducing temperatures, and by smothering the flame through the release of inert gases that deprive the fire of oxygen (fuel).

Applications

This extinguisher is designed for use in residential and industrial settings. It can be used on live electrical equipment.

Maintenance

To keep the extinguisher in perfect working order, follow the regulations in force in the country of installation. If no specific regulations apply, maintenance must be carried out as specified in Standard UNI 9994-1:2013. For installations in Italy, refer to the Ministerial Decree of 7 January 2005, specifically Standard UNI 9994-1:2013, and to the instruction booklet supplied with the extinguisher. Use only original spare parts: using non-original parts voids the extinguisher’s approvals.

A portable fire extinguisher is essential equipment in any place where there is a fire risk. The permanently pressurised model is ready to use and does not require auxiliary propellants to operate. Drawing on more than 50 years of experience in fire protection, this extinguisher is manufactured using state-of-the-art systems that meet the strict construction criteria laid down by European standards. Each extinguisher is pressurised with a mixture of 97% nitrogen and 3% helium: nitrogen prevents condensation from forming inside the cylinder, preserving its integrity and preventing clumping of the extinguishing agent; helium is used as a tracer to check for leaks using mass spectrometry. Every unit produced is checked for leaks.

All extinguishers are made from raw materials supplied by recognised leading suppliers. All purchased products undergo strict quality checks to ensure high performance and excellent quality.

The extinguisher is manufactured in accordance with EN3-7 and Directive 2014/68/EU (PED), and is approved for sale on the Italian market in accordance with the Ministerial Decree of 7 January 2005.

Extinguishing Agent

ABC monoammonium phosphate (MAP) powder. This multipurpose powder is suitable for extinguishing Class A fires involving solid combustible materials such as wood, paper and textiles; Class B fires involving flammable liquids, oils, fats and paints; and Class C fires involving flammable gases. The effectiveness of the extinguishing agent is proportional to its MAP content. The powder extinguishes mainly by inhibiting unburnt material through negative catalysis, while generally reducing temperatures, and by smothering the flame through the release of inert gases that deprive the fire of oxygen (fuel).

Applications

This extinguisher is designed for use in residential and industrial settings. It can be used on live electrical equipment.

Maintenance

To keep the extinguisher in perfect working order, follow the regulations in force in the country of installation. If no specific regulations apply, maintenance must be carried out as specified in Standard UNI 9994-1:2013. For installations in Italy, refer to the Ministerial Decree of 7 January 2005, specifically Standard UNI 9994-1:2013, and to the instruction booklet supplied with the extinguisher. Use only original spare parts: using non-original parts voids the extinguisher’s approvals.

A portable fire extinguisher is essential equipment in any place where there is a fire risk. The permanently pressurised model is ready to use and does not require auxiliary propellants to operate. Drawing on more than 50 years of experience in fire protection, this extinguisher is manufactured using state-of-the-art systems that meet the strict construction criteria laid down by European standards. Each extinguisher is pressurised with a mixture of 97% nitrogen and 3% helium: nitrogen prevents condensation from forming inside the cylinder, preserving its integrity and preventing clumping of the extinguishing agent; helium is used as a tracer to check for leaks using mass spectrometry. Every unit produced is checked for leaks.

All extinguishers are made from raw materials supplied by recognised leading suppliers. All purchased products undergo strict quality checks to ensure high performance and excellent quality.

The extinguisher is manufactured in accordance with EN3-7 and Directive 2014/68/EU (PED), and is approved for sale on the Italian market in accordance with the Ministerial Decree of 7 January 2005.

Extinguishing Agent

ABC monoammonium phosphate (MAP) powder. This multipurpose powder is suitable for extinguishing Class A fires involving solid combustible materials such as wood, paper and textiles; Class B fires involving flammable liquids, oils, fats and paints; and Class C fires involving flammable gases. The effectiveness of the extinguishing agent is proportional to its MAP content. The powder extinguishes mainly by inhibiting unburnt material through negative catalysis, while generally reducing temperatures, and by smothering the flame through the release of inert gases that deprive the fire of oxygen (fuel).

Applications

This extinguisher is designed for use in residential and industrial settings. It can be used on live electrical equipment.

Maintenance

To keep the extinguisher in perfect working order, follow the regulations in force in the country of installation. If no specific regulations apply, maintenance must be carried out as specified in Standard UNI 9994-1:2013. For installations in Italy, refer to the Ministerial Decree of 7 January 2005, specifically Standard UNI 9994-1:2013, and to the instruction booklet supplied with the extinguisher. Use only original spare parts: using non-original parts voids the extinguisher’s approvals.