Skip to main content
DN45

ProductCT62C

Special Airone Talpa DN45 Cabinet for Outdoor Wet Hydrant Networks with Dry Valve

CE marking

From €436.00

Special Airone Talpa DN45 Cabinet for Outdoor Wet Hydrant Networks with Dry Valve

Product description

OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with:

  • Airone DN45 cabinet
  • Provision for a hole and anti-wasp ventilation slots
  • Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use
  • Stand available in two heights, 400 mm and 750 mm
  • PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand
  • Installation instructions. Available in the following versions:
  • Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227
  • AISI 304 stainless steel.

Standard cabinet contents

  • DN45 flexible hose certified to EN 14540, with UNI 804 aluminium alloy couplings and binding to UNI 7422 using rubber binding sleeves
  • Red plastic hose support
  • 1 ½″ dry hydrant valve
  • Adjustable jet nozzle
  • Installation instructions
  • CE mark identification code sticker
  • Seal

Variants

Filter variants

48 / 48 variants

Select up to 4 SKUs, including from different products while browsing, to compare them.

Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 15 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 20 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 25 m - Mistral 12 k72 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 30 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 15 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 20 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 25 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 30 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 15 m - Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 20 m - Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 25 m - Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h400 Hose Reel AL 30 m - Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 15 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 20 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 25 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 30 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 15 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 20 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 25 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 30 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 15 m - Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 20 m - Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 25 m - Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Red with panel h750 Hose Reel AL 30 m - Mistral 13 k85 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 15 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 20 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 25 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 30 m - Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 15 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 20 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 25 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa wall-mounted fire hose cabinet DN45 Stainless Steel with panel h400 Hose Reel AL 30 m - Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 15 m – Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 20 m – Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 25 m – Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h400 panel, AL hose 30 m – Mistral 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 15 m – Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 20 m – Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 25 m – Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 30 m – Mistral 12 k72 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Mistral nozzle with Ø 12 mm orifice (K 72), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 15 m – Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 20 m – Miami 13 k85 OUTDOOR WITH DRY VALVE UNI EN 671-2 Special cabinet for outdoor wet hydrant networks, Type 2, “C” shape, complete with: Airone DN45 cabinet Provision for a hole and anti-wasp ventilation slots Opening device with handle and seal, unbreakable “Integra” panel, complete with instructions for use Stand available in two heights, 400 mm and 750 mm PN16 dry frost-proof DN45 hydrant valve with automatic drain. - Above-ground height 1200 mm for 750 mm stand. - Above-ground height 750 mm for 400 mm stand Galvanized steel sheet painted with polyester resin, corrosion-resistant in accordance with ISO 9227 AISI 304 stainless steel. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Hose support cradle made of red thermoplastic. Dry hydrant valve DN45, UNI EN 1982, GAS ISO 228 inlet and UNI 810 outlet, 1½″ thread compliant with ISO 7-1, PN16 with automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), adjustable for full jet, spray and shut-off. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 25 m – Miami 13 k85 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 30 m – Miami 13 k85 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Miami nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 15 m – Mistral 13 k85 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 15 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 20 m – Mistral 13 k85 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 20 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 25 m – Mistral 13 k85 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 25 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.
Airone Talpa DN45 stainless steel wall-mounted hydrant with h750 panel, AL hose 30 m – Mistral 13 k85 Outdoor AIRONE Talpa cabinet for wet hydrant networks, with a sloped canopy, transparent INTEGRA panel and red RAL 3000 finish. Stand height: 400 mm. The configuration uses a frost-proof DN45 dry hydrant valve with PN16 automatic drain. Standard DN45 equipment Flexible DN45 hose certified to EN 14540, 30 m long, with UNI 804 aluminium-alloy couplings and UNI 7422 binding with rubber protective sleeves. Red thermoplastic hose support cradle. Dry hydrant valve DN45, 1½″, with thread compliant with ISO 7-1, PN16 rating and automatic drain. DN45 Mistral nozzle with Ø 13 mm orifice (K 85), with adjustable full-jet, spray and shut-off settings. Installation and operating instructions. CE identification and marking label. Seal.